1380W Digital Magnetic Induction Heater for Professional Paintless Car Dent Removal

Push dents out from inside, 1380W paintless dent repair machine with insulated heating head

It sits there on the panel and the body shop quote is too high. You put it off because neither option feels right and the dent stays. Apply heat, let the metal expand and contract, and push the dent back out.

At 1380W and 150KHz, the electromagnetic induction heater pushes concentrated heat into the metal. A digital display shows real-time temperature and power settings during each repair. An insulated heating head sits between the tool and the surface to prevent burns.

Metal expands and contracts under the heat, which pushes the dent out from inside. Real-time readouts let you track temperature and power as each repair runs. The full set packs into a carrying case for garage, shop, or mobile repairs.

This kit handles a range of dent sizes through the same electromagnetic heating process. Paintless repair keeps the original surface coat in place through the whole process, and the carrying case keeps everything together and ready for the next job.

• 1380W ELECTROMAGNETIC HEATER: Runs at 1380W and 150KHz to push concentrated induction heat directly into the dented metal panel.
  
  
• METAL EXPANSION MECHANIC: Heat causes the metal to expand and contract, working the dent out from inside the panel.
  
  
• DIGITAL DISPLAY SCREEN: Shows real-time temperature and power levels so you stay in control through every repair.
  
  
• INSULATED HEATING HEAD: Sits between the tool and the vehicle surface to stop accidental burns during use.
  
  
• PAINTLESS DENT REPAIR: Original surface coat stays in place throughout the process with no repainting needed.
  
  
• REAL-TIME MONITORING: Track temperature and power output on the display as each repair progresses.
  
  
• DURABLE CARRYING CASE: Full tool set packs into a carrying case for use in the garage, shop, or on location.
  
  
• RANGE OF DENT SIZES: The electromagnetic heating process handles different dent sizes in the same repair workflow.

Product Specifications

• Power: 1380W
• Frequency: 150KHz
• Heater Type: Electromagnetic induction
• Display: Digital, real-time temperature and power readout
• Heating Head: Insulated
• Repair Type: Paintless dent repair
• Use: Car body dent removal
• Portability: Durable carrying case included
• Use Locations: Garage, shop, mobile

What's Included

• 1 x 1380W Electromagnetic Induction Heater
• 1 x Insulated Heating Head
• 1 x Durable Carrying Case

Frequently Asked Questions

How does the electromagnetic heating process actually remove the dent?
The 1380W induction heater pushes concentrated heat directly into the metal panel. As the metal heats up it expands, and as it cools it contracts. This expansion and contraction cycle works the dent out from inside the panel without any need to touch the surface from the outside.

Will this damage the paint on my vehicle?
No, the paintless dent repair process keeps the original surface coat in place throughout the entire repair. The insulated heating head also sits between the tool and the vehicle surface to prevent direct contact burns that could otherwise affect the finish.

How do I know if the heat level is right during a repair?
The digital display shows real-time temperature and power readings throughout every repair session. You can monitor both figures as the repair progresses and adjust settings as needed to stay in the right range for the panel you are working on.

Can this be used outside of a fixed garage setup?
Yes, the full tool set packs into the included durable carrying case which makes it practical to use in a home garage, professional shop, or on location for mobile repairs. The carrying case keeps every component together and protected between jobs.